Aluminum

Almunium

luminum pipe fittings are lightweight, corrosion-resistant components used to connect and control the flow of fluids in piping systems. They are commonly used in industries like aerospace, automotive, and HVAC, where reducing weight is essential. Aluminum fittings come in various forms, including elbows, tees, reducers, and couplings, providing flexibility for different applications. Their resistance to corrosion, especially in marine and outdoor environments, makes them ideal for such settings. Although lighter than brass or steel, aluminum fittings offer a good balance of strength and durability. They are easy to install and maintain, making them a cost-effective choice for many piping systems. Aluminum pipe fittings combine performance with practicality, especially for applications requiring reduced weight and increased resistance to weathering.

Element	Aluminum 6061	Aluminum 6063	Aluminum 2011	Aluminum 7075
Silicon (Si)	0.4–0.8%	0.2–0.6%	5.5–6.5%	0.4% max
Iron (Fe)	0.7% max	0.35% max	0.5% max	0.5% max
Copper (Cu)	0.15–0.4%	0.1% max	0.5–1.0%	1.2–2.0%
Manganese (Mn)	0.15% max	0.1% max	0.4% max	0.3% max
Magnesium (Mg)	1.0–1.5%	0.45–0.9%	0.3–0.8%	2.1–2.9%
Chromium (Cr)	0.04–0.35%	0.1% max	0.1% max	0.18–0.28%
Zinc (Zn)	0.25% max	0.1% max	0.1% max	5.1–6.1%
Titanium (Ti)	0.15% max	0.1% max	0.1% max	0.2% max
Other Elements	0.05% max	0.1% max	0.1% max	0.2% max
Aluminum (Al)	Remainder (~97.5%)	Remainder	Remainder	Remainder

Physical Property	Aluminum 6061	Aluminum 6063	Aluminum 2011	Aluminum 7075
Density	2.70 g/cm³	2.70 g/cm³	2.82 g/cm³	2.81 g/cm³
Tensile Strength	290 MPa (42,000 psi)	160–210 MPa (23,000–30,500 psi)	275 MPa (40,000 psi)	570 MPa (83,000 psi)
Yield Strength	240 MPa (35,000 psi)	120 MPa (17,400 psi)	195 MPa (28,000 psi)	505 MPa (73,000 psi)
Modulus of Elasticity	68.9 GPa (10,000 ksi)	68.9 GPa (10,000 ksi)	73.1 GPa (10,600 ksi)	71.7 GPa (10,400 ksi)
Thermal Conductivity	151 W/m·K	201 W/m·K	121 W/m·K	130 W/m·K
Melting Point	582–652°C (1080–1205°F)	600–650°C (1112–1202°F)	480–510°C (896–950°F)	477–635°C (890–1175°F)
Electrical Conductivity	40% IACS	40% IACS	38% IACS	30% IACS
Hardness (Brinell)	95 HB	70–95 HB	95 HB	150–190 HB

Notes:

• Density: The mass per unit volume of the material, representing its weight for a given volume.
• Tensile Strength: The maximum stress the material can withstand before breaking or failing.
• Yield Strength: The stress at which a material begins to permanently deform or yield under load.
• Modulus of Elasticity: A measure of the stiffness of the material, or its ability to resist elastic deformation under stress.
• Thermal Conductivity: The ability of the material to conduct heat. Higher values indicate better heat transfer capabilities.
• Melting Point: The temperature at which the material changes from solid to liquid.
• Electrical Conductivity: The ability of the material to conduct electricity, expressed as a percentage of the International Annealed Copper Standard (IACS).
• Hardness (Brinell): The material's resistance to indentation or surface wear. Higher values represent harder materials.